TECO F510 - Page 6

Page 6 of 11 06/10/17
Type
Name
Functions
Display
Main digital
displays
Frequency, parameter, voltage, current, temperature and
Fault message.
LED status display
FAULT: When the inverter has a warning or fault message,
the indicator lights up.
FWD: When the inverter is in forward run mode, the indicator
lights up.
RUN mode: Continuously ON.
Stop mode: Flashes ON/OFF.
REV: When the inverter is in revere Run mode, the indicator
lights up.
RUN mode: Continuously ON.
Stop mode: Flashes ON/OFF
SEQ: When Run command source is set to external control,
the indicator lights up.
REF: When Frequency command source is set to external
control, the indicator lights up.
Keys
RUN
RUN: Run command at the set frequency.
STOP
STOP: Stop command. Decelerate or Coast to stop.