Chapter 3 Program Tools 30
① Enter H01 coil
② Into HMI/TEXT edit frame
③ Choice the “T”
④ Choice the “E”
⑤ Choice T01 current
⑥ Choice T01 current (unit)
⑦ Choice T01 present (unit), user can modify T01 preset value when H coil enable and display on LCD.
Download to SG2, and I01 turn ON, or press “SEL” if the H coils is set to mode 1, then the SG2 LCD will
display the first H text as shown below.
Stop display Run display
Ⅰ, Press “↑” or “↓” to choice the nearest H coil
, Press “SEL”+“↑” or “↓”and “OK” update TⅡ 01
preset value (In this example, 050.0 can update, T01
preset value depends on HMI/TEXT edit frame
setting.)
Build-in ASCII code and multi-language characters:
Multi-language characters including English, French, Spanish, Italian, German, Portuguese, Polish;
Also, according to the different settings, you can display Russian or Turkish characters.
85 Built-in Chinese characters, which read as following left of the HMI/TEXT editor window;
60 characters which user define, edit step 1~6 as follows right of the HMI/TEXT editor window.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
To Next Page
Loading...
