Chapter 3 Program Tools 50
LCD Display Main Menu
(1) The Main Menu as SG2 under ‘STOP’ Mode.
Press “ESC” key on keypad after power on for entering into the Ladder main menu or FBD main menu, which
depends on the program format, Ladder or FBD mode in SG2.
Menu Description
> LADDER Ladder edit
FUN.BLOCK Ladder function block
(timer/counter/RTC …) edit
FBD FBD display
PARAMETER FBD block or LADDER function
block parameter display
RUN RUN or STOP
DATA REGISTER DR display
CLEAR PROG. Clear the user program and the
password
WRITE Save user program to PM05 (3rd)
READ Read user Program from PM05
SET System setting
RTC SET RTC setting
ANALOG SET Analog setting
PASSWORD Password setting
LANGUAGE Select the language
INITIAL initially set Edit method
(2) The Main Menu as SG2 under ‘RUN’ Mode.
> LADDER
FUN.BLOCK
FBD
PARAMETER
STOP
DATA REGISTER
WRITE
RTC SET
PASSWORD
LANGUAGE
Press the Button
↑ ↓
Move the Cursor to select Main Menu
OK Confirm the selected Function
ESC Skip to Initial Screen
※SG2 can be modified, edited, cleared and read user program only when it is under STOP Mode.
As the program is modified, ※ SG2 will automatically backup it to FLASH.
PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
To Next Page
Loading...
