Challenger10 Installation and Quick Programming Manual 31
Programming users
Unless you will be programming (adding) the system’s users yourself, you will
need to program at least one administrator who will be able to program additional
users. See Challenger10 Administrators Manual for details.
The default values for User 50, the master code, are:
• Name TECOM Master
• PIN 4346
• Alarm Group 3 (contains areas 1 to 16, as defined by Area Group 1)
• Door Group 1
• Floor Group 1
Note: You may need to add areas to Area Group 1. See “Working with multi-area
systems” on page 26.
To Next Page
Loading...
