TECOM Challenger10 - Preface

iv Challenger10 Installation and Quick Programming Manual
Preface
This is the Challenger10 Installation and Quick Programming Manual. It is part of
the following suite of manuals for the Challenger10 intrusion detection and
access control panel.
• The Challenger10 Installation and Quick Programming Manual is for
installation technicians to install a Challenger panel.
• The Challenger10 Users Manual is suitable for most users of the
Challenger10 system to perform everyday tasks.
• The Challenger10 Administrators Manual is for users and system
administrators who need to manage the Challenger10 system via its
text-based user interface.
• The Challenger10 Programmers Manual is for system administrators and
installers who need to manage the Challenger10 system via its
text-based user interface (in particular the “Install” menu”).
This manual describes:
• How to install a Challenger panel
• How to connect other equipment to the Challenger panel
• Challenger programming required for basic system setup
This manual is intended for use only by trained Challenger installation and
configuration technicians.
Notes
• The permissions assigned to you may not allow you to do everything
described in this manual. You may not be able to see all menu items
described in this manual.
• A qualified service person, complying with all applicable codes, should
perform all required hardware installation.