Tecumseh AH5540E - Follow the Labels; Serial Label Information

12
SERVICE HANDBOOK
A H 3 0 1 F T - 0 7 7
SE1490C 281254 AH5540E
V230/208HZ60 LRA103.0
V200 HZ50 PHI USA P
BILL OF MATERIAL NUMBER
SERIAL NUMBER
PHASE
COMPRESSOR
MODEL NUMGER
ELECTRICAL RATING
VOLTS - HERTZ
SECOND LETTER INDICATES MONTH
(SEE TABLE 2-1), NEXT TWO DIGITS
INDICATE DAY OF MONTH, THE
FOLLOWING 2 DIGITS INDICATE YEAR
Example of compressor serial plate
FIGURE 2-3:
Follow the Labels
Tecumseh Products Company compressors have labels and markings with important informa-
tion. For your safety and the safety of others, read the labels and markings on the product.
Serial Label Information
The only source for complete compressor information is on the compressor serial label. On earlier
compressors, the serial plate is usually spot-welded on the upper housing of the compressor. For
current compressors, the serial label is affixed in the same location. Both describe the character-
istics of the compressor.
The months are identified in Table 2-1.
MANUFACTURING CODE DATE
MONTH=SEPTEMBER
YEAR=2000
DAY = 24
THE LETTER REPRESENTS THE MONTH
(SEE TABLE 2-1).
THE NUMBERS REPRESENT THE YEAR.
J2400
Example of condensing unit serial label
FIGURE 2-5:
ELECTRICAL RATING
VOLTS - HERTZ - LRA - PHASE
COMPRESSOR
MODEL NUMBER
LETTER INDICATES MONTH (SEE TABLE 2-1), NEXT 2 DIGITS INDICATE DAY
OF THE MONTH, FOLLOWING 2 DIGITS INDICATE YEAR
Example of compressor serial label
FIGURE 2-4:
BILL OF MATERIAL NUMBER