4
Safety Warning Labels & Product Specifications
Important: Please review all labels and supporting materials before using your DEX II
™
.
This drawing indicates the locations of the warning labels found on your product. If a label is missing, illegible or is removed,
contact Teeter Customer Service to request a complimentary replacement label.
Note: Image and labels below not shown at actual size.
Assembled Non-Use Dimensions: 41.0 (L) x 29.0 (W) x 48.0 in (H) (104.1 x 73.7 x 114.3 cm)
Maximum In-Use Dimensions: 41.0 (L) x 29.0 (W) x 48.0 in (H) (104.1 x 73.7 x 114.3 cm)
Weight
(approx.): 66.1 lbs (30.1 kg)
41.0 in (104.1 cm)
48.0 in (114.3 cm)
29.0 in (73.7 cm)
Unpack and Prepare Your Workspace
• If possible, set up the product at or near the space in which you intend to use it to avoid moving it later.
• Unpack all parts and support materials. Follow the unpacking instructions included in the box. Set aside packing materials
and clear your work area.
• Locate the Hardware Kits, packaged with the manuals. They are labeled to correspond with the assembly process.
Before Beginning Assembly
To Next Page
Loading...
