Teeter Sit-Stand Desk - Important Safety Instructions; Before Beginning Assembly

WARNING
!
FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY.
To reduce the risk of property damage or injury:
• Read and understand all the instructions, review all other accompanying documents, and inspect the equipment before using the
Sit-Stand Desk. It is your responsibility to familiarize yourself with the proper use of this equipment and the inherent risks if these
instructions are not followed, such as property damage or injury. It is the responsibility of the owner to ensure that all users of the
product are fully informed about the proper use of the equipment and all safety precautions.
• DO NOT sit, stand, climb, hang or lean on the desktop in any direction to avoid potential of furniture tip-over or falls.
• ALWAYS have adult supervision when used by children.
• DO NOT exceed the max allowable weight of each listed component; Desktop: 150.0 lb (68.0 kg); Side Table: 50.0 lb (22.7 kg);
Seat: 250 lb (113.4 kg).
• ALWAYS clear the desktop of all items prior to moving the desk or adjusting the height or angle of the desktop to prevent the
risk of damage and/or injury.
• ALWAYS ensure that all of the Auto-Locking Knobs are properly locked in a hole setting denoted by a depressed red button in
the center prior to use.
• DO NOT modify the equipment or use accessory attachments that are not recommended by the manufacturer. Utilize the
equipment for its intended purpose only. Any changes or modifications to equipment may void the user warranty.
• It is the responsibility of the user to ensure that regular maintenance is performed. Verify that all nuts and bolts are accounted
for and properly tightened. Replace worn or damaged parts immediately or keep out of use until repair.
1
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE SIT-STAND DESK
SAVE THESE INSTRUCTIONS
Unpack and Prepare Your Workspace
• If possible, set up the product at or near the space in which you intend to use it to avoid moving it later.
• Unpack all parts and support materials. Set aside packing materials and clear your work area.
• Locate the Hardware Kits. They are labeled to correspond with the assembly process.
Before Beginning Assembly
For step-by-step, 3D interactive instructions, download BILT (a FREE mobile app) to your
smartphone to follow along. Simply download the BILT app by scanning the QR code
below and then search for Teeter Sit-Stand Desk within the BILT app to get started!
Making Assembly Even Easier with