Teeter Sit-Stand Desk - Assembly Steps; Assemble Seat Bushing and Desktop Base; Assemble Seat Frame Connector to Seat Frame Base

STEP
1
Assemble Seat Bushing and Desktop Base
• Position the Desktop Base on a level surface.
• Slide the Seat Bushing on top of the Desktop Base Post (Figure 1).
STEP
2
Assemble Seat Frame Connector to Seat Frame Base
• Locate the Seat Frame Base Assembly Hardware Kit (HK1030).
• With the u-shape of the Seat Frame Base facing you, insert the Seat
Frame Connector into the Seat Frame Base with the horizontal post
facing away from you (Figure 2a).
• Secure the screws and washers into the designated holes with the
Allen Wrench provided (Figure 2b).
5
FIGURE 1
FIGURE 2a
1
1
Desktop Base Post
FIGURE 2b