8
Using the timer
The timer has been designed to help you guarantee the cooking result by
allowing you to optimise energy consumption.
• To start the timer: press the touches + or - .
• Programme the cooking time. Fig. 12
• Start with the heat source at maximum power.
• You can change the cooking time at any point
by pressing the + or - buttons.
• As soon as ActiCook
®
has reached the cooking
temperature, the timer rings and the
countdown begins.
• Reduce the power of the heat source to
around one third.
• At the end of the cooking time, the timer rings.
• To stop the timer ringing, press the + or -
buttons.
• Turn off the heat source.
I close
ActiCook
®
your pressure cooker heats up
I select
1/2 or
/
.
I programme the
cooking time
I set the heat source
to maximum power
I add the
ingredients
1
2
4
3
Fixed programmed
time
This image flashes at the start of use and recommends that
you begin cooking with the heat source at full power.
Once the cooking time countdown has begun, the image
indicates that you should reduce the heat source to around
a third of its power.
The timer must be
clipped to the
pressure cooker in
order to work.
During cooking,
check that the valve
murmurs regularly.
If there is not
enough steam,
increase the heat
source slightly; if
there is too much
steam, reduce the
heat source.
To Next Page
Loading...
Need help?
General
