TEFAL ActiCook User Manual

12
• Set the selector to the chosen cooking
position; 1/ 2 or
/
- Fig. 4.
• Set the timer to the desired cooking time. Fig.
12.
• Make sure that ActiCook
®
is properly closed
before using it.
• Place ActiCook
®
on a heat source set to
maximum power.
During cooking
• When steam escapes from the steam release
outlet continuously, while emitting a regular
noise (pschhht), the cooking time countdown
begins automatically, with an audible signal.
• During cooking, check that the valve murmurs
regularly. If there is not enough steam,
increase the heat source slightly; if there is too
much steam, reduce the heat source.
End of cooking
• At the end of cooking, the timer rings to
indicate that cooking is finished.
• Release the steam, by aligning the
position selector (E) with the icon
- fig 10
• Check that the pressure indicator (D) has
fallen.
• Set the position selector (E) on the
icon - Fig 1.
• Then open ActiCook
®
by lifting the lid
- Fig 2.
Turn ActiCook
®
so
that the position
selector is facing
you.
As with any cooking
utensil, ensure close
supervision if you
are using ActiCook
®
near children.
The steam is very
hot when it comes
out of the escape
outlet.
Watch out for the jet of
steam.
If, during decompres-
sion, you notice an
abnormal release of
pressure: return the
selector to its initial
cooking position:
1/2
or
/
, wait for a
few minutes, then de-
compress again slowly,
making sure that there
are no more abnormal
pressure releases.
To move ActiCook
®
, use
the pan handles.

TEFAL ActiCook Specifications

General

Brand	TEFAL
Model	ActiCook
Category	Electric Pressure Cooker
Language	English