EN
7
Using the position selector
The position selector allows you:
• To open and/or close ActiCook
®
. See the
paragraphs "Opening" and "Closing".
• To release the steam at the end of cooking,
by aligning the position selector (E) with the
icon
- fig 10
• To select your cooking position - fig 4
• To cook delicate foodstuffs and vegetables:
Set the position selector to icon
1 or
• To cook meat, fish and frozen food:
Set the position selector to icon
2 or
Timer
ActiCook
®
is fitted with a timer that automatically counts down the cooking
time after reaching the temperature level for the selected cooking position:
1/2 or
/
.
Fitting and removing the timer
• To fit the timer (C) in place Fig. 11, first insert
the rear part into the control module and then
press to clip the front part.
• To remove the timer (C), lift it using the tab
and remove it.
Front part
Rear part
Tab
To Next Page
Loading...
Need help?
General
