TEFAL ActiCook User Manual

EN
11
First use
• Clip the tripod (I) beneath the Vitamin basket
(H) - Figs. 7 and 8.
• Place the Vitamin basket (H) in the bottom of
the pan - Fig. 9.
• Fill with water up to 2/3 of the pan (M).
• Close ActiCook
®
.
• Set the position selector to 2 or .
• Set the timer for 20 min. Place ActiCook
®
on a
heat source set to maximum power.
• When the steam begins to escape through the
valve, the timer rings. Reduce the heat source.
• After 20 minutes have elapsed, turn off your
heat source.
• Set the selector to - fig 10.
• When the pressure indicator (D) falls again:
ActiCook
®
is no longer under pressure.
• Open ActiCook
®
by setting the selector to
- fig 1.
Using your appliance
Before cooking
• Before using the appliance, always make sure that
the control module is correctly attached (use a coin
to help you with this) and check that the operating
valve (P) located on the inside of the lid can move
freely, by moving the position selector to 1 or
and pressing with your finger. and pressing the
valve with your finger.
• Check visually and in plain daylight that the steam
release outlet (A) is not blocked.
- Fig. 14.
• Also check that the safety valve (Q) can be moved:
see Fig. 16 and the paragraph "Cleaning and
maintenance".
• Determine the quantity of water required for your
cooking. See the paragraphs "Cooking".
• Close ActiCook
®
.
Turn ActiCook
®
so
that the position
selector is facing
you.
Do not try to force
opening. Ensure
that the pressure
indicator (D) is in
the lowered
position.
Operating valve

TEFAL ActiCook Specifications

General

Brand	TEFAL
Model	ActiCook
Category	Electric Pressure Cooker
Language	English