16
Opening safety:
• If ActiCook
®
is under pressure, the position
selector cannot be set to the opening icon
as the mechanism is locked by the pressure
indicator (D) (in raised position).
• In this case, do not try to force opening, but
set the position selector to and wait for
the pressure indicator (D) to fall before
opening ActiCook
®
.
• Never force ActiCook
®
open.
• Above all do not touch the pressure indicator.
• Make sure that the interior pressure has fallen
(pressure indicator (D) in lowered position).
Two safety measures against
overpressure:
• First measure: the safety valve (Q) releases
the pressure and steam escapes from beneath
the control module: - fig 18
• Second measure: the seal allows steam to
escape from between the lid and the pan
- fig 19
If one of the overpressure safety systems is
triggered:
• Turn off the heat source.
• Let ActiCook
®
completely cool down.
• Open.
• Check and clean the operating valve (P),
the steam release outlet (A), the safety
valve (Q) and the seal (G).
• If, after these checks and cleaning, your
product leaks or no longer works, take it to
an TEFAL Approved Service Centre.
To Next Page
Loading...
Need help?
General
