EN
19
TEFAL answers your questions
Problems Recommendations
If you are unable to
close the lid:
• Make sure that the position selector (E) is aligned
with the icon.
• Check the correct positioning of the seal. See the
paragraph "Cleaning and maintenance".
• In the case of opening/closing during cooking, apply
light pressure to the centre of the lid to close
ActiCook
®
.
If the pressure
indicator has not
risen.
• Set the position selector (E) on one of the cooking
icons 1/2 or
/
.
• If the problem persists, have your pressure cooker
checked by an TEFAL Approved Service Centre
If the pressure indi-
cator has risen and
nothing is escaping
through the vent
during cooking
This is normal during the first few minutes. If the phe-
nomenon persists, check that:
• The heat source is sufficiently strong; if not, in-
crease it.
• The quantity of liquid in the pan is sufficient.
• The operating valve is on either
1/2 or
/
.
• ActiCook
®
is properly closed.
• There is no deterioration at the seal or edge of the
pan.
• The seal is correctly positioned in the lid, see the
paragraph "Cleaning and maintenance".
If the phenomenon persists:
• Turn off the heat source.
• Set the position selector to .
• Wait for the pressure indicator to fall.
• Open ActiCook
®
.
• Clean the operating valve and the steam release
outlet.
To Next Page
Loading...
Need help?
General
