Teknatool NOVA - Operating Instructions; Starting and stopping; Changing the speed

119-0811-001 12
Operating instructions:
Starting and stopping:
To start the lathe with
the remote, press and
hold the Start/Stop
button for 2 seconds.
To stop the lathe, just
press and release the
Start/Stop button
once.
Changing the speed:
To change the
operating speed of the
wood lathe with the
remote, simply press
or hold the ‘Speed Up’
or ‘Speed Down’
button.
NOTE: When
changing the speed,
the lathe can be
running or stopped.