NOVA DVR Wireless Remote
Features:
Fits on any “Remote II Ready” NOVA DVR Wood Lathe.
Wireless control convenience at your fingertips.
Start, stop and speed adjustments.
Suitably sized buttons for rapid reference and control.
Invaluable for long spindle work or large platters/bowls when
you can't be close to the headstock.
2.4 GHz Radio Frequency (RF) operation (FCC Compliant).
Range up to 23 feet ( 7 meter ) line of sight.
Up to 1 years stand-by battery life.
Up to 6 months battery life with up to 20 commands per day.
1-Year warranty excludes battery.
NOTE:
All values are approximate and calculated under the specific test conditions. For
end users, these values might be varied according to workshop conditions, other
electronic equipment interference, battery types and operation distance, etc.
Wireless Remote may not be available in all countries/markets or may require an
additional optional accessory Retro Fit Kit for older DVR lathes. See our website
or your NOVA Retailer for more information.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1). This device may not cause harmful interference, and
(2). This device must accept any interference received, including interference that may cause undesired
operation.
Note:
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment
To Next Page
Loading...
