EasyManua.ls Logo

TEKO Broadcast SYNAPSE30 - Section Three; Installation & Use; Delivery; Operating Recommendations

TEKO Broadcast SYNAPSE30
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SYNAPSE30-2G 30W FM Exciter User Manual
Section Three
INSTALLATION & USE
DELIVERY
Please carefully check TEKO Broadcast delivery box for any punctures or other evidence
of damage. If any, please notify TEKO Broadcast as soon as possible.
When unit is delivered as STAND ALONE equipment the following items are included:
Exciter
Mains cable - in some countries cable is supplied with one connector only.
Customers must use matching connector to adapt to local standard mains socket
The above content could not be included in equipment delivered to Customers already
integrated in a system.
OPERATING RECOMMENDATIONS
To prevent failure please strictly follow
these IMPORTANT recommendations
Ensure that both front and rear part of equipment are properly ventilated. To prevent high
temperature inside equipment you must provide adequate ventilation to rack cabinet where
equipment is installed (temperature should not exceed 45 °C degrees)
PLEASE NOTE: Exciter cannot operate without top cover
The air-cooling system is designed to work in a closed box. Serious
OVERHEATING will occur if Exciter operates without top cover