Need help?Do you have a question about the Tektronix 2213A and is the answer not in the manual?
General| Type | Oscilloscope |
|---|---|
| Bandwidth | 60 MHz |
| Channels | 2 |
| Vertical Sensitivity | 2 mV/div to 5 V/div |
| Rise Time | 5.8 ns |
| Input Impedance | 1 MΩ |
| Weight | 7.7 kg (17 lb) |
| Display | CRT |
| Power Requirements | 48-440 Hz |
Covers power, grounding, fuses, and operating hazards for safe use.
Details electrical, environmental, and physical characteristics of the instrument.
Initial setup and safety considerations before operating the oscilloscope.
Details on acceptable input voltages, power cords, and grounding.
Description of controls and indicators related to display, power, and probe adjustment.
Controls for setting gain and fine-tuning vertical deflection factors.
Controls for selecting sweep speed, variable control, and X10 magnification.
Controls for selecting trigger mode (NORM, P-P AUTO, etc.) and the TRIG'D-READY indicator.
Techniques for signal manipulation, comparison, and time-based measurements.
To Next Page
