Need help?Do you have a question about the Tektronix 2205 and is the answer not in the manual?
General| Type | Oscilloscope |
|---|---|
| Bandwidth | 20 MHz |
| Channels | 2 |
| Vertical Sensitivity | 5 mV/div to 5 V/div |
| Time Base | 0.2 μs/div to 0.5 s/div |
| Input Impedance | 1 MΩ, 20 pF |
| Maximum Input Voltage | 400 V (DC + AC peak) |
| Trigger Modes | Auto, Normal |
| Power Supply | 100-240 VAC, 48-440 Hz |
Ensures safe operation by connecting the power cord to a properly wired receptacle.
Guidelines for using the correct power cord and fuse to prevent hazards.
Emphasizes the need for another person capable of rendering first aid during servicing.
Highlights the danger of touching exposed connections while the instrument is powered on.
Provides essential safety information and steps for initial start-up of the instrument.
Crucial safety considerations for connecting the instrument and general warnings.
Instructions on setting the voltage selector and installing the correct line fuse for operation.
Describes the function and location of the instrument's front-panel controls, connectors, and indicators.
Provides a functional overview of the 2205 Oscilloscope, referring to block diagrams.
Provides in-depth explanations of specific circuits like Vertical, Trigger, Sweep, Horizontal, Z-Axis, Power Supply.
Explains the goal of verifying instrument performance and identifying calibration needs.
Describes component replacement, special parts, ordering, and maintenance aids.
Details how to isolate loads from power supplies to locate short circuits.
To Next Page
