Need help?Do you have a question about the Tektronix 2221 and is the answer not in the manual?
General| Type | Digital Storage Oscilloscope |
|---|---|
| Bandwidth | 100 MHz |
| Channels | 2 |
| Vertical Sensitivity | 5 mV/div to 5 V/div |
| Time Base Range | 20 ns/div to 50 s/div |
| Display | CRT, 8 x 10 div |
| Input Impedance | 1 MΩ ±2%, 20 pF ±3 pF |
| Input Coupling | AC, DC, GND |
| Weight | 4.5 kg (10 lb) |
| Trigger Modes | Auto, Normal, Single |
| Power Supply | 100-240 V AC, 50/60 Hz |
Overview of the 2221 Digital Storage Oscilloscope's capabilities.
Safety precautions before initial start-up.
Description of power controls, indicators, and display adjustments.
Explanation of vertical and horizontal system controls.
Description of trigger and storage system controls.
Proper grounding and signal connection procedures.
Initial setup and probe compensation steps for instrument calibration.
Procedures for obtaining common oscilloscope displays.
Procedures for performing basic measurements in non-storage mode.
Procedures for performing measurements using digital storage.
Proper grounding, power cord, fuse usage, and operational restrictions.
Overview of the 2221 Digital Storage Oscilloscope's capabilities.
Safety precautions and initial start-up steps.
Description of power controls, indicators, and display adjustments.
Explanation of vertical and horizontal system controls.
Proper grounding and signal connection procedures.
Initial setup and probe compensation steps for instrument calibration.
Procedures for obtaining common oscilloscope displays.
Procedures for performing basic measurements in non-storage mode.
Procedures for performing measurements using digital storage.
Understanding and mitigating aliasing in digital sampling.
Procedures for capturing glitches and detecting missing pulses.
Lists of included and recommended accessories.
Overview of GPIB and RS-232-C communications options.
Information for operating the GPIB interface.
Information for operating the RS-232-C interface.
Setting GPIB address and interpreting interface status indicators.
How the oscilloscope responds to standard interface messages.
Side panel controls and RS-232-C parameter configuration.
Commands and protocols for communication.
Information on waveform preamble and data encoding formats.
Status byte reporting mechanisms for communication options.
Specific commands for querying and controlling key instrument functions.
Commands for controlling display and configuring data acquisition.
Commands for saving and recalling reference waveforms.
Commands for waveform transfer and preamble information.
Commands for service requests, general utilities, and RS-232-C specific functions.
Essential requirements and preparation steps for performance checks.
Verifying vertical deflection accuracy and position control.
Verifying horizontal timing accuracy and linearity.
Verifying trigger system functionality.
Checking external Z-axis, probe, clock, and plotter operations.
Identifying RS-232-C device types and understanding interconnection rules.
Wiring illustrations for RS-232-C cables.
Supported plotter formats and configuration settings.
To Next Page
