PARTS ORDERING INFORMATION
Replacement parts are available from or through your local Tektronix, Inc. Field
Office or representative.
Changes to Tektronix instruments are sometimes made to accommodate improved
components as they become available, and to give you the benefit of the latest circuit
improvements developed in our engineering department. It is therefore important, when
ordering parts, to include the following information in your order: Part number, instrument
type or number, serial or model number, and modification number if applicable.
If a part you have ordered has been replaced with a new or improved part, your
local Tektronix, Inc. Field Office or representative will contact you concerning any change
in part number.
xooo
00 X
* 000- 0000-00
Use 000-0000-00
o
I
SPECIAL NOTES AND SYMBOLS
Part first added at this serial number
Part removed after this serial number
Asterisk preceding Tektronix Part Number indicates manufactured by
or for Tektronix, Inc., or reworked or checked components.
Part number indicated is direct replacement.
Screwdriver adjustment.
Control, adjustment or connector.
To Next Page
Loading...
