Tektronix DPO3034 User Manual

Trigger Setu p
6. Push Trigger On and turn multipurpose knob
a to scroll through the side-bezel menu until
you select the desired trigger on feature.
IfyouareusingtheI2C bus trigger, you
can trigger on Start, Repeated Start,
Stop, Mi ssing Ack, Address, Data,or
Address/Data.
If you are using t he SPI bus trigger, you can
trigger on SS Active, MOSI, MISO,orMOSI
&MISO.
If you are using the CAN bus trigger, yo u can
trigger on Start of Frame, Type of Frame ,
Identifier, Data, Id & Data, End of Frame ,
and Missing A ck.
If you are using the RS-232 bus trigger, you
can trigger on Tx Start Bit , Rx Start Bit, Tx
End of Packet, Rx End of Packet,Tx Data,
or Rx Data.
If you are using the LIN bus trigger, you
can trigger on Sync, Identifier, Data, Id &
Data,Wakeup Frame, Sleep Frame,orError.
DPO3000 Series Oscilloscopes User Manua l 123

Tektronix DPO3034 Specifications

General

Brand	Tektronix
Model	DPO3034
Category	Test Equipment
Language	English