Acquisition
4. If the instrument does not pass,
recalibrate the instrument, or have the
instrument se
rviced by qualified service
personnel.
NOTE. To always show the SPC status icon
or display a w
arning when SPC has not
been run in more than a month, click the
corresponding check box.
5. If the SPC needed icon is red, perform a
signal path compensation.
32 MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO 5000B Series U ser M anual
To Next Page
Loading...
