Getting Acquainted with the Oscilloscope
25. Print.PushtoprinttoaPictBridgeprinter.
26. Power switch. Push to power on or off the
oscilloscope.
27. USB 2.0 Host port. Insert a USB
peripheral to the oscilloscope, such as a
keyboard or a flash drive.
28. Save. Push to perform an imm ediate save
operation. The save operation uses the
current save param eters, as defined in the
Save / Recall menu.
29. Default Setup. Push to perform an
immediate resto re of the oscilloscope to
the default settings.
DPO2000 and MSO2000 Series Oscilloscopes User Man ual 61
To Next Page
Loading...
