Tektronix MSO4000B Series Technical Reference

Specifications
Table 1: Analog channel input and vertical specifications (cont.)
Characteristic Description
Crosstalk (channel
isolation), typical
100:1 at 100 MHz and 30:1 at >100 MHz u p to the rated bandwidth for any two channels having
equal Volts/Div settings
TekVPI Interface The probe interface allows installing, powering, compensating, and controlling a wide range of probes
offering a variety of features.
The interface is available on all front panel inputs including Aux In. Aux In only provides 1 M input
impedance and does not offer 50  as the other input channels do.
Total probe power
Five Tek VPI-compliant probe interfaces (one per channel)
50 W maximum internal probe power
Voltage Max Amperage Voltage Tolerance
5V
50 mA (250 mW) ±5%
Probe power per
channel
12 V
2 A (24 W) ±10%
Horizontal and Acquisition System Specifications
The following table shows the horizontal and acquisitions system specifications
for the MSO4000B Series and the DPO4000B Series oscilloscopes.
Table 2: Horizontal and acquisition system specifications
Characteristic Description
MSO4104B, DPO4104B,
MSO4104B-L, DPO4104B-L,
MSO4102B-L, DPO4102B-L,
MSO4102B, DPO4102B
5 GS/s — 2.5 S/sSample-rate range
DPO4054B,
DPO4034B
DPO4014B
2.5 GS/s —2.5 S/s
Record Length Range Non-L models: 20 M, 10 M, 5 M, 1 M, 100 k, 10 k, 1 k
L m odels: 5 M, 1 M, 100 k, 10 k, 1 k
Instrument 1 k 10 k 100 k – 20 M
MSO4104B, DPO4104B,
MSO4102B-L, DPO4102B-L,
MSO4102B, DPO4102B
MSO4104B-L, DPO4104B-L (2
channels enabled)
400 ps – 40 s 400 ps –
400 s
400 p s – 1,000 s
Seconds/Division range
DPO4054B,
DPO4034B
DPO4014B
MSO4104B-L, DPO4104B-L (4
channels enabled)
1 ns – 40 s 1 ns – 400 s 1 ns – 1,000 s
Maximum triggered acquisition rate
> 50,000 wfm/s
MSO4000B and DPO4000B Series Specifications and Performance Verification 9

Tektronix MSO4000B Series Specifications

General

Brand	Tektronix
Model	MSO4000B Series
Category	Test Equipment
Language	English