MyScope
Using MyScope Control Windows
To open a previously defined MyScope control window, do the following:
1. Select MyScope > Open Control
Window... or one of the five most
recently used MyS cope windows.
2. Select the
MyScope control window you
want to use, and then click Open.
To display the active MyScope control window, do the following:
1. Select MyScope > Current... or click
MySco
pe in the toolbar mode. (Your
MyScope control window remains active
even when it is not displayed.)
MSO70000/C, DPO/DSA70000B/C, DPO7000, and MSO/DP O5000 Series U ser M anual 141
To Next Page
Loading...
