Acquisition
2. Select Instrument Calibration.
4. If the instrument does not pass,
recalibrate the instrument, or have the
instrume
nt serviced by qualified service
personnel.
NOTE. To always show the SPC status icon
or displa
y a warning when SPC has not
been run in more than a month, click the
corresponding check box.
5. If the SPC needed icon is red, perform a
signal path compensation.
30 MSO70000/C, DPO/DSA70000B/C, DPO7000, and MSO/DP O5000 Series U ser M anual
To Next Page
Loading...
