Tektronix TBS1052B-EDU

U.S. nationally recognized
testing laboratory listing
■
UL 61010-1. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 1: General Requirements.
■
UL 61010-2-030. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 2-030: Particular
requirements for testing and measuring circuits.
■
UL 61010-031. Particular requirements for handheld probe assemblies for
electrical measurement and test equipment.
Canadian certification
■
CAN/CSA-C22.2 No. 61010-1. Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use – Part 1: General
Requirements.
■
CAN/CSA-C22.2 No. 61010-2-030. Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use – Part 2-030:
Particular requirements for testing and measuring circuits.
■
CAN/CSA-C22.2 No. 61010-031. Particular requirements for handheld probe
assemblies for electrical measurement and test equipment.
Additional compliances
■
IEC 61010-1. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 1: General Requirements.
■
IEC 61010-2-030. Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use – Part 2-030: Particular
requirements for testing and measuring circuits.
■
UL 61010-031. Particular requirements for handheld probe assemblies for
electrical measurement and test equipment.
Equipment type
Test and measuring equipment.
Safety class
Class 1 – grounded product.
Safety certification of
plug-in or VXI modules
The safety certification is valid only when installed in an appropriately approved
(by a USA NRTL or a Canada Certified Organization) mainframe.
Compliance information
TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual xv