Need help?Do you have a question about the Tektronix TBS1072B and is the answer not in the manual?
General| Bandwidth | 70 MHz |
|---|---|
| Channels | 2 |
| Sample Rate | 1 GS/s |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity | 2 mV/div to 5 V/div |
| Timebase Range | 5 ns/div to 50 s/div |
| Math Functions | Add, Subtract, Multiply, Divide, FFT |
| FFT | Yes |
| Input Coupling | AC, DC, GND |
| Record Length | 2.5 k points |
| Display | 7-inch WVGA (800 x 480) LCD |
| Trigger Modes | Edge, Pulse Width, Video |
| Automatic Measurements | Frequency, Period |
| Interfaces | USB 2.0 |
| Rise Time | <= 5 ns |
| Input Impedance | 1 MΩ ± 2% |
| Maximum Input Voltage | 300 V (DC + peak AC) |
| Probe | 1:1 and 10:1 passive probes included |
| Power Supply | 100 to 240 V ±10%, 50/60 Hz |
General precautions to avoid injury and product damage.
Specific warnings for electrical hazards, grounding, and product handling.
Details probe safety, manual compensation, and attenuation settings.
Covers autoset, autorange, saving, and recalling setups for optimal display.
Explains trigger types, modes, coupling, and slope/level settings for stable waveforms.
Describes methods for taking measurements using graticule, cursors, and automatic functions.
Introduces FFT for frequency domain analysis and setup procedures.
Covers displaying the FFT spectrum, selecting windows, and identifying aliasing.
Details essential functions like Acquire modes, Autoset, and Autorange.
Covers trigger types, modes, source, coupling, and key points.
Lists and describes various time and amplitude measurements.
Lists bandwidth, channels, sample rate for different models.
To Next Page
