Need help?Do you have a question about the Tektronix TBS1000 Series and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Coupling | AC, DC, GND |
| Operating Temperature | 0 °C to +50 °C |
| Memory Depth/Record Length | 2.5 kpoints |
| Vertical Resolution | 8-bit |
| Trigger Modes/Types | Edge, Pulse Width, Video |
| Interfaces | USB 2.0 |
| Math Functions | +, -, *, / |
| Probe Interface | BNC |
| Bandwidth | 50 MHz to 200 MHz |
| Display | 7-inch WVGA (800x480) LCD |
| Maximum Input Voltage | 300 VRMS, CAT II |
Details parameters of the oscilloscope's signal acquisition system.
Specifies parameters related to the oscilloscope's time base and sweep functions.
Outlines specifications for the oscilloscope's trigger functions and modes.
Outlines the steps for verifying oscilloscope performance against specifications.
Step-by-step guide for calibrating and adjusting the oscilloscope.
Precautions for preventing electrostatic discharge damage to components.
Overview of steps for disassembling and reassembling the oscilloscope.
A flowchart to help isolate specific troubleshooting procedures.
Steps to diagnose and resolve power supply issues.
Procedures for diagnosing and fixing display-related problems.
Steps to diagnose and resolve front panel control issues.
Procedures for diagnosing and resolving issues with the main board.
To Next Page