Tektronix TBS1052C User Manual

TBS1000C Series Oscilloscopes
Series Digital Storage Oscilloscope
Technical Reference
*P077158300*
077-1583-00

Tektronix TBS1052C Specifications

General

Bandwidth	50 MHz
Channels	2
Sample Rate	1 GS/s
Time Base Range	5 ns/div to 50 s/div
Math Functions	Add, Subtract, Multiply, Divide, FFT
Display	7-inch WVGA (800X480) LCD
Input Impedance	1 MΩ ± 2%
Trigger Types	Edge, Pulse Width
Connectivity	USB 2.0
Power Supply	100 to 240 V AC

Summary

Important Safety Information

General safety summary

General precautions for safe operation and product care.

To avoid fire or personal injury

Specific warnings and procedures to prevent fire and personal injury.

Service Safety

Service safety summary

Information for qualified personnel performing service procedures.

Specifications

Model overview

Triggering system

Power and Environmental

Performance Verification

Required equipment

List of equipment needed for performance verification procedures.

Test record

Performance verification procedures

Check DC gain accuracy

Procedure to test the DC gain accuracy of input channels.

Check bandwidth

Procedure to test the bandwidth of all input channels.

Check sample rate accuracy and delay time accuracy

Test for sample rate and delay time accuracy.

Check Vertical Position Accuracy Setup

Check edge trigger sensitivity

Procedure to test edge trigger sensitivity for input channels.

Check Aux In edge trigger sensitivity

Procedure to test edge trigger sensitivity for the Aux In.

Check Aux In edge trigger sensitivity setup

Check Vertical Position Accuracy

Test to define DC Measurement Accuracy of the oscilloscope.