Need help?Do you have a question about the Tektronix TBS1052B and is the answer not in the manual?
General| Bandwidth | 50 MHz |
|---|---|
| Channels | 2 |
| Sample Rate | 1 GS/s |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity | 2 mV/div to 5 V/div |
| Timebase Range | 5 ns/div to 50 s/div |
| Interfaces | USB 2.0 |
| Record Length | 2.5 kpts |
| Display | 7-inch WVGA (800 x 480) |
| Trigger Types | Edge, Pulse Width |
| Display Type | Color LCD |
| Display Resolution | 800 x 480 |
| Input Impedance | 1 MΩ |
| Power Supply | 100 to 240 V |
Provides general safety precautions for using the oscilloscope and preventing injury or damage.
Details precautions to prevent fire and personal injury during product operation and handling.
Safety guidelines and best practices for using oscilloscope probes and test leads.
Details how to install the oscilloscope, including power cord and power source requirements.
Highlights safety precautions specific to using oscilloscope probes to avoid electric shock.
Details the procedure for manually adjusting probe compensation for accurate measurements.
Explains the self-calibration routine to optimize signal path accuracy and when to perform it.
Provides an overview of the oscilloscope's front panel controls and screen display layout.
Details the function of vertical controls like Position and Scale for waveform adjustment.
Explains the function of horizontal controls like Position and Scale for waveform timing adjustment.
Describes the Trigger Menu, Level knob, and Force Trig button for controlling waveform acquisition.
Covers essential setup functions: Autoset, Autorange, saving, and recalling setups.
Explains how triggers work, their steps, and the importance of the trigger source.
Defines acquisition modes (Sample, Peak Detect, Average) and time base settings for digitizing signals.
Explains how to adjust waveform display size (scale) and location (position) on the screen.
Explains how to use cursors for precise time and amplitude measurements on waveforms.
Details how the oscilloscope can perform up to six automatic measurements accurately.
Guides on quickly displaying and measuring signal frequency, period, and peak-to-peak amplitude.
Explains how to use the Autoset button for quick signal display and automatic measurement setup.
Details how to use the Measure menu for automatic signal measurements like frequency and rise time.
Guides on using cursors to take time and amplitude measurements on waveforms.
Guides on displaying the FFT spectrum, selecting source, window, and zoom factor.
Explains two methods for saving/recalling setups, images, and waveforms using USB flash drives.
Guides on downloading and installing Tektronix OpenChoice PC Communications software before connecting.
Provides step-by-step instructions for connecting the oscilloscope to a PC via USB.
Details acquisition parameters like Sample, Peak Detect, and Average modes for capturing waveforms.
Explains the Autorange function for automatically adjusting settings to track signals.
Details the Autoset function for automatically adjusting controls for a usable signal display.
Details measurement cursors, their types (Time, Amplitude), and how to move them.
Details horizontal controls for adjusting trigger point location and horizontal scale (time/division).
Explains accessing automatic measurements, their types, and how to display them on screen.
Details trigger types (Edge, Video, Pulse Width) and options for defining trigger conditions.
Describes the Utility menu options for display, language, self-calibration, and file utilities.
Provides a summary of models, bandwidth, channels, sample rate, and record length.
Details specifications for the vertical system: resolution, sensitivity, gain accuracy, input voltage.
Details specifications for the horizontal system: time base range, accuracy, and zoom.
Specifies trigger system features: input, modes, types, source, view, and frequency readout.
Lists specifications for cursors and automatic measurements available on the oscilloscope.
Lists power source specifications: voltage, frequency, and power consumption.
Details physical dimensions, shipping dimensions, weight, and rackmount kit specifications.
Details environmental specifications: temperature, humidity, altitude, and regulatory compliance.
Guides on optimizing probe low-frequency compensation by adjusting the trimmer for a flat-top square wave.
Summarizes safety precautions for using probes and accessories to avoid hazards.
Provides detailed safety guidelines for probe use: grounding, connections, terminal ratings, and inspections.
To Next Page
