Tektronix TBS1052B Security Instructions

Nonvolatile memory devices container (TBS1000B & TBS1000B-EDU)
This section lists the nonvolatile memory devices for the TBS1000B and
TBS1000B-EDU products. These products have a different hardware platform
than the TBS1000, TDS1000B/TDS2000B, TDS1000C-EDU/TDS2000C, and
TPS2000B Series.
Nand flash
Type and size 2 G bit (256 X 8)
Function Kernel code, application code, waveform data, backup data, and user stored data
Type of user information
stored
Both user data and user settings
Backed up by battery? No
Method of modification Indirect
Data input method Firmware operations
Location Main Acquisition board
User accessible No
To clear Remove power from the instrument for at least 20 seconds.
Process to sanitize Remove power from the instrument for at least 20 seconds.
SPI flash
Type and size 16 M bit
Function U-boot, FPGA configurable code and constant parameters
Type of user information
stored
Both user data and user settings
Backed up by battery? No
Method of modification Indirect
Data input method Firmware operations
Location Main Acquisition board
User accessible No
To clear Remove power from the instrument for at least 20 seconds.
Process to sanitize Remove power from the instrument for at least 20 seconds.
Nonvolatile memory devices (cont.) Memory devices
Declassification and Security Instructions 5

Tektronix TBS1052B Specifications

General

Bandwidth	50 MHz
Channels	2
Sample Rate	1 GS/s
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Interfaces	USB 2.0
Record Length	2.5 kpts
Display	7-inch WVGA (800 x 480)
Trigger Types	Edge, Pulse Width
Display Type	Color LCD
Display Resolution	800 x 480
Input Impedance	1 MΩ
Power Supply	100 to 240 V