Removal and Installation Procedures
Maintenance
6Ć54
WARNING
HighĆvoltage is present on the anode lead. Before unplugging the
anode in the following substep, you must discharge it: ground a
flatĆbladed screwdriver (Item 5) with an insulated handle to the
chassis through a suitable grounding strap. Next, probe under the
insulating cap of the anode lead and touch the lead's metal
conductor to discharge. Repeat. After unplugging the anode in
substep d, touch its metal conductor to the chassis for a few
minutes to further ensure discharge.
!
WARNING,
WARNING
WARNING
WARNING
To Next Page
Loading...
Need help?
General
