Installation
TDS 420A, TDS 430A & TDS 460A Service Manual
2-5
Table 2- 3: Effects of Corrupt ed Data (Cont .)
Corrupted Data Type Results
Reference Waveforms Waveform Lost
Saved Setups Setup Lost
Repackaging Instructions
Use a corrugated cardboard shipping carton having a test strength of at least
125 kg (275 pounds) and with an inside dimension at least 152.4 mm (6 inches)
greater than the oscilloscope dimensions. (The original shipping carton, if
available, meets these requirements.)
If the oscilloscope is being shipped to a Tektronix Service Center, enclose the
following information: the owner’s address, the name and phone number of a
contact person, the type and serial number of the oscilloscope, the reason for
returning to oscilloscope, and a complete description of the service required.
Seal the shipping carton with an industrial stapler or strapping tape.
Mark the address of the Tektronix Service Center and also your own return
address on the shipping carton in two prominent locations.
Installed Options
Your oscilloscope may be equipped with one or more options. Except for the
line-cord options described by Table 2--2 (on page 2--2 of this chapter), all
options and optional accessories are listed and described in Chapter 7, Options.
For further information and prices of oscilloscope options, see your Tektronix
Products catalog or contact your Tektronix Field Office.
To Next Page
Loading...
Need help?
General
