TDS1000/2000-Series Digital Oscilloscope User Manual
1
Getting Started
TDS1000-Series and TDS2000-Series Digital Storage Oscilloscopes
are small, lightweight, benchtop packages that you can use to take
ground-referenced measurements.
In addition to the list of general features, this chapter describes how
to do the following tasks:
H Install your product
H Perform a brief functional check
H Perform a probe check and compensate probes
H Match your probe a ttenuation factor
H Use the self calibration routine
NOTE. You can select a language to display on the screen when you
power on the oscilloscope. At any time, you can push the UTILITY
button, and push the Language option button to select a language.
To Next Page
Loading...
