Getting Started
4
TDS1000/2000-Series Digital Oscilloscope User Manual
Installation
Power Cord
Use only power cords designed for your oscilloscope. Use a power
source that delivers 90 to 264 VAC
RMS
, 45 to 66 Hz. If you have a
400 Hz power source, it must de liver 90 to 132 VAC
RMS
, 360 to
440 Hz. Refer t o page 171 for a list of available power c ords.
Securing cable
Power cable
Security Loop
Use the built-in cable channels to secure both your oscilloscope and
extension module to your location.
To Next Page
Loading...
