Teldat Regesta Smart PRO User Manual

Fig. 3: Connector Panel
The connector panel includes the following elements:
Front Panel Elements
Item Description
A RST. Reset button. For further details on the functionality of the reset button, see RST but-
ton on page 29.
B CONF. RJ-45 connector providing access to the device's local console for configuration and
monitoring purposes. (This connector can also be used as an RS-232 asynchronous DCE
serial port)
For more information about the CONF connector, please refer to:
- Console connector as serial port (CONF connector) on page 26
- Configuration connector on page 37
- Configuration interface on page 40
C WAN Gigabit Ethernet. SFP connector.
For more information about the WAN interface with SFP connector, refer to:
- WAN connections on page 23
- WAN SFP connector on page 36
- WAN SFP interface on page 39
D WAN Gigabit Ethernet. RJ-45 connector.
For more information about the WAN interface with Base-T connector, please refer to:
- WAN connections on page 23
- WAN Base-T connector on page 36
- WAN Base-T interface on page 39
E LAN Gigabit Ethernet Port.
Teldat S.A.
2 Product Overview
Regesta Smart PRO 11

Teldat Regesta Smart PRO Specifications

General

Brand	Teldat
Model	Regesta Smart PRO
Category	Network Hardware
Language	English