How to fix local console displaying rubbish on Teldat Regesta Smart PRO?
If the local console displays only rubbish on your Teldat Network Hardware, verify that the terminal has the correct port configured and that the terminal configuration is set to 115200 8N1.
How to troubleshoot no LED lights on Teldat Regesta Smart PRO router?
If no LED lights up on your Teldat Network Hardware router, check the power supply to the router, including the power source and the main power outlet.
General| Connectivity Technology | Wired, Wireless |
|---|---|
| Frequency Band | 2.4 GHz, 5 GHz |
| Security Protocols | WPA, WPA2, WPA3 |
| Type | Router |
| WAN | 1 x 10/100/1000 Mbps |
| LAN | 4 x 10/100/1000 Mbps |
| Wi-Fi | 802.11a/b/g/n/ac |
| Cellular | 4G LTE |
| Power Supply | 12V DC |
| Device Type | Router |
| Wireless Standards | IEEE 802.11a/b/g/n/ac |
| Firewall | Stateful Packet Inspection (SPI) |
| Management Interface | CLI |
Details the front panel, including status LEDs and their meanings.
Important conditions for installing the equipment safely and correctly.
Step-by-step guide to remove and install the connector protective casing.
Details on how to connect the router to a power source.
Explains the power connector and its pins for DC and AC power.
Overview of various data connection types available on the router.
Details the Gigabit Ethernet LAN port and its specifications.
Describes the WAN interface, including SFP and RJ-45 connectors.
Information on connecting WWAN antennas for cellular connectivity.
Overview of serial port connections available on the router.
Provides solutions for common installation and operational issues.
To Next Page