Transmitter LED indicator
Three stages power indicator
1. Green color (Full power): Operate as usual.
2. Yellow color (Mid Power): Stop operation until new batteries are replaced.
3. Red (Low Power): A Stop signal will be sent to receiver automatically to turn off receiver. To avoid
the interruption during operation, check battery power frequently.
Inspection & Troubleshooting
Inspection
The daily inspection is highly recommended for safety reason. The inspection includes EMS Button,
Rotary Key and all other relevant functions. Stop the operation immediately when any error occurs and
resume to work until the error is being removed.
Transmitter LED Indicator
Transmitter red LED indicator blinking (Fast)
Pushbutton Jammed
Power-On without releasing EMS button
Not correct Power-On procedure
Transmitter red LED indicator blinking (Slow)
Low battery power, replace new batteries immediately
Transmitter red LED indicator remain ON
Check transmitter e-Card if is correctly installed
Receiver LED Indicator
The receiver LED indicator provide the messages to the operator as below
Receiver relay module LED3 blinking
Check receiver e-Card if is correctly installed
To Next Page
Loading...
Need help?
General
