- 21 -
Set Pin
The PIN code of the unit changed. Use “ ”/“ ” buttons to go to “Set PIN” option. Press OK to display the
“Set PIN” window. Use numeric buttons to enter new pin number. You will need to input your new pin a second
time for verication purposes. If both pin numbers are four digits long and the same, the pin code will be
changed. The factory default pin number is 0000. If you change the pin number, make sure you write it down
and keep it safe for future references.
Menu Lock
In menu lock you can set locking for All Menus, or the Installation Menu to restrict access to these menu’s. If
the menu lock is disabled, there will be free access to the menu system. Use “ ”/“ ” buttons to go to Menu
Lock option. Use “ ”/“ ” buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with the correct lock key. So the user can’t add, delete, rename,
channels, can’t set timers.
INSTALLATION : Installation menu is locked. So the user can’t add channels. Changes will be updated after
exiting ‘Conguration Menu’.
Maturity Rating
If this option is set, TV gets the maturity information from the broadcast (if available) and if this maturity level
is disabled a PIN code is required to watch the selected channel.
Time Settings
Highlight Time Settings and press OK button to enter. Time Zone Setting will be available and Current
Time will be displayed. The time information is received with the broadcast signal if the Time Zone Setting
is set to Auto. If you set to Manual and Time Zone settings will be enabled.
Select Time Zone and set using “ ” and “ ” buttons, Current Time will change according to the selected
Time Zone value.
Low Power
Use “ ” or “ ” button to select Low Power and then press “ ” or “ ” button to set this setting as Yes or No.
To save energy, Low power option should be selected as Yes.
Automatic Power Down
Press “ ” or “ ” button to select Automatic Power Down. Use “ ” or “ ” button to set the Automatic Power
Down to Yes or No. If you don’t use STB for a long time, the box will switch off.
To Next Page
Loading...
Need help?
General
