- 22 -
Standby Search
If you change Standby Search to Off, this function will be unavailable. To use Standby search please make sure
that you select Standby Search as On. If the Standby Search is set to On, when the TV is in standby mode,
available broadcasts will be searched. If the TV locates any new or missing broadcasts, a menu screen will
be displayed, asking you whether or not to execute these changes. Channel list will be updated and changed
after this process. Please activate Standby Search setting in order to enable your TV for automatically updating
the broadcast frequency of the broadcaster, broadcast denition and similar changes.
Biss Key
Biss is a satellite signal scrambling system that is used for some broadcasts. If you need to enter BISS key on
a broadcast, you can use Biss Key setting located in the Other Settings menu. Highlight Biss Key and press
OK to enter keys on the desired broadcast.
Channel List update
When you switch on/off the set top box, it scans channels automatically to update the channel list. To
activate this select “Auto”.
Language
To Next Page
Loading...
Need help?
General
