- 28 -
Hint
Active Channels (Optional)
When the “TV/RADIO” button is pressed on the
remote control the receiver changes mode (TV only,
Radio only). When the mode is changed, receiver
tunes to the rst service on the selected mode.
Channel List (Red Button)
When the RED button is pressed whole program list
is displayed. If the last watched/listened program is
one of the favourite programs then the favourite list
will be displayed.
Audio Mode Selection (Yellow Button)
• The YELLOW key (LRS) will toggle the sound mode.
The mode is stereo as default. If you want to listen
only the left or only the right speaker, sound mode
can be changed with this key.
• On single sound channel modes, same sound
channels will be switched to both left and right
outputs. When the mode is changed, an appropriate
OSD will be displayed for a while and this will be
stored for this program for switching back to the
requested audio mode next time.
Info / Help
• When INFO key is pressed an information menu
OSD will be displayed.
• Info bar gives information related to currently
watched program. This info includes program
number, program name, program mode (TV or
Radio), transponder name, transponder frequency,
favourites icon, (if the program is one of the favourite
programs), scrambled/unscrambled channel,
polarisation, audio mode, whether the program has
teletext or not and short event description, broadcast
resolution (i.e. 576i, 576p, 720p, 1080i or 1080P).
Language button (AUDIO)
The Lang button allows selecting another sound
track of the present program. When the language
button is pressed a menu will be displayed showing
the number of possible audio languages for TV and
tracks for radio programs available. You can navigate
using “ ” or “ ” buttons and select with OK button.
If an audio language supports Dolby Digital output,
“Dolby D” expression is seen at the end of the audio
language name If the program does not have multi
audio, a pop-up message will be displayed.
EPG (Electronic Programme Guide)
Press the EPG ( ) button to display the electronic
program guide (EPG) where you can view the event
information (start and end time for current and next
events, program number, program name, event name
of the programs in tuned transponder) and set timers
for the events. For more information see the section,
Electronic Programme Guide.
Favourite Programme (FAV.)
You can navigate within favourites by pressing the
FAV ( ) button (if available). A program can be
selected as a favourite from the program table menu.
Mute
When the MUTE ( ) button is pressed, mute symbol
will be displayed on the screen. The mute symbol will
stay until MUTE button is pressed again. The mute
symbol will not be displayed on the screen if there is
another menu displayed on the screen.
Subtitle
Some channels can be broadcast with subtitles
displayed on-screen for the hard-of-hearing. This
function selects the desired subtitle language
and enables the automatic displaying of subtitles
whenever subtitle information is available. Press the
Subtitle ( ) buton to activate the subtitle menu.
Previous Channel (P<P)
You can display the last watched channel by using
P<P ( ) button.
Teletext ( TEXT)
You can use teletext with your receiver’s remote
control. By pressing TEXT ( ) button you can
activate the Teletext broadcasting. You can use RED,
GREEN, YELLOW and BLUE buttons in teletext
menu. Press MENU to exit from Teletext.
To Next Page
Loading...
Need help?
General
