EasyManua.ls Logo

Telemic HouseControl - Signal Lights

Default Icon
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction 13
1.3.1 Signal Lights
There are two signal lights in L- and M-model HouseControls and one in the S-model HouseControl. The
unit’s operating mode can be seen from signal light B. Signal light A is not relevant in HouseControl
applications, and it is not discussed in this manual.
Table 3. Signal light B.
Signal light B Operating mode
Blinks about once a second in green
(S-model: Flashes once)
Normal mode (monitoring is on)
Blinks in green and red
(S-model: Flashes twice in a row)
Disable mode (monitoring is off)
Blinks in red
(S- model: Blinks fast)
Programming mode
Blinks rapidly in red
(S- model: Remains on for one second)
The unit is sending or receiving a text message
Flashes in red
The unit is saving data in non-volatile memory
Remains red
The unit has lost connection to the GSM module
SIM card holder
Operation switch
Signal lights A and B

Related product manuals