Telemic HouseControl - 4 Technical Specifications

22 HouseControl User’s Manual version 4.8
4. TECHNICAL SPECIFICATIONS
S-model HouseControl
Dimensions: 140 x 90 x 38 mm
Weight: n. 260 g
Current consumption: at idle 1.5 - 20 mA / 12 V maximum 0 mA
Supply voltage: 10 – 13.8 V Molex Mini-fit connector
Serial port: RJ-8
Maximum values for outputs: power 2700 W
current 10 A
voltage 230 VAC
Inputs: min. control circuit current 3,5mA/12V
max. control circuit resistance 30kohm / 12V
Operating conditions: -20…+50 °C
GSM module: Siemens TC45
SIM card: small, 3V
Antenna: Dual-band (900/1800), SMA connector
M- and L-model HouseControls
Dimensions: 140 x 90 x 38 mm
Weight: n. 260 g
Current consumption: at idle 40 - 100 mA / 12 V maximum 500 mA
Supply voltage: 8 - 30 V Molex Mini-fit junior connector
Serial port: RJ-8
Audio connector: RJ-6
AD-4 / RE-4 connector: RJ-4
Maximum values for outputs 1-4: power on 2700 W
current 10 A
voltage 230 VAC
Maximum values for outputs 5-8: power 30 W
current 0.5 A
voltage 50 V
Inputs: min. control circuit current 3,5mA/12V
max. control circuit resistance 30kohm / 12V
Operating conditions: -20…+50 °C
GSM module: Siemens TC35
SIM card: small, 3V
Antenna: Dual-band (900/1800), SMA connector
Notes that apply to all HouseControl models
The unit is not protected against water or any liquids.
Even though M- and L-model HouseControls use supply voltage of 8-30V and S-model HouseControl
10-13.8V, please, keep in mind that external devices (such as motion detectors) might not tolerate such
high voltages.
Technical specifications are subject to change without prior notice.