USER GUIDE – Confidea G3 30
If a unit is accidentally switched off during the update (e.g. due to empty battery) , this
will temporarily stop the update , but after a few minutes the update for the other units will
continue
6. When the update is finished, click Continue to reboot the WCAP. After a delegate unit
update, only the devices will be reboot.
7. When you return to the update page, you now see the firmware version you installed for the
WCAP and/or WDU’s.
6.3. Login settings
Select Login settings ( ) in the main menu to change user name and password. Click Save settings
to save any changes made.
6.4. System info
On the system info page you can find the following information:
To Next Page
Loading...
