USER GUIDE ā Confidea G3 33
7. Linking CoCon to the WCAP
7.1. Introduction
To obtain your CoCon license you need the MAC address of the Confidea WCAP. Using the MAC
address of the WCAP makes the license independent of the computer on which the CoCon Room
Server is running. The license will allow only one concurrent connection and the software will adapt
automatically to the license modules which are active in the license file.
You can find the MAC address on the System info page under License. Copy the MAC address and
send this together with the P-number (can be found on the CoCon package) to
CoCon-
license@televic.com. You will receive an email containing the requested license file.
7.2. Upload license
The license is an XML file, you can open the file to check whether the license contains the correct
modules. The file should also contain the MAC address of your WCAP. To upload your file complete
the following procedure:
1. Select System info from the main menu.
2. Go to license and click Upload license.
3. Select the license file you received by email.
4. When the upload is complete, you will be able to see which models are licensed.
5. Connect CoCon to the central equipment.
To Next Page
Loading...
