Need help?Do you have a question about the Telex Audiocom US-2000 and is the answer not in the manual?
Details how the US-2000 receives power externally via input jack or channel connectors.
Equipment tested and found to comply with Class A limits, may cause interference in residential areas.
Describes functions like RESET and TEST SIGNAL for microprocessor control.
Refers to callouts in Figure 1 for external connections and controls.
Adjusts headset listen level and own voice level heard in earphones.
Adjusts voice activation level for headset and panel microphones.
Explains operation modes (latched, momentary) for headset and panel mic keys.
Details how to turn VOX mode on and off for microphones.
Explains how to talk on all channels or public address system.
Describes microphone kill, program kill, and audible call alert features.
Explains latched and momentary operation for talk keys on each channel.
Describes sending and receiving call signals on the intercom system.
Explains latched and momentary operation for listen keys on each channel.
Details program inputs, volume controls, and their functions.
Explains 12-15 VDC input and PA output jacks.
Describes EXP OUT and Speaker Output jacks.
Details the XLR connectors for intercom channels and loop-through wiring.
Specifies switch and jumper changes for using the US-2000 with Clear-Com equipment.
Specifies switch and jumper changes for routing audio to separate powered speakers.
Explains internal adjustments for Return Cancellation and Limiter.
Provides pinout details for headset and panel mic/stereo headset connectors.
Details the pinout for the DB9F Program Inputs connector.
Describes the pinout for the 1/8-inch Stereo Phone Jack P.A. Output.
Details the pinout for RCA Phone Jack Speaker Outputs.
Explains the XLR connector pinouts for Audiocom and Clear-Com modes.
Describes Expansion Out and External Power jacks.
Details electrical interface requirements for headset and panel microphone.
Provides output level, impedance, and cancellation specs for balanced channels.
Provides output level, impedance, and cancellation specs for unbalanced channels.
Details specifications for voltage gain, output level, and input impedance.
Specifies PA output level and headphone amplifier performance.
Details sidetone level and panel microphone amplifier performance.
Specifies VOX range and speaker output characteristics.
General| Brand | Telex |
|---|---|
| Model | Audiocom US-2000 |
| Category | Intercom System |
| Language | English |
To Next Page
