Telindus 1132 - Ethernet Switch Settings

TELINDUS 1132/1133 Web Interface User’s Guide
Version 2.0 Page 23/57 December 2004
The Apply button will temporarily save these settings. To make the change permanent, you need
to click on Save All Settings. At the System Commands page under the TOOLS, click on Save
All.
4.5.2 Ethernet Switch
The Ethernet switch settings can be configured in this way: see Figure 13 bis (Ethernet Switch
Configuration)
Figure 13bis (Ethernet Switch Configuration)
The Apply button will temporarily save these settings. To make the change permanent, you need
to click on Save All Settings. At the System Commands page under the TOOLS, click on Save
All.